Building a Good Foundation: Using Driven Piles

March 13, 2019

If you want to build a good base or foundation for your building, you need to understand the advantage of pilings. Pilings are designed to keep a structure upright and strong and are therefore needed first before a building is built.

Resisting Unwanted Forces

Piling contractors provide pilings that hold a building’s weight and that can be used in weaker soil. You really cannot build a structure unless its foundation is supported with impact-absorbent pilings. Many of the pilings used at construction sites are driven piles. These piles are made of slender, long columns made to resist certain forces and are sized and shaped prior to installation. Because they are driven, they are inserted using a hammering machine that pushes the column into the ground.

A Complete Engineering Solution

In many cases, a driven pile offers a complete engineering solution. The design of the pile and its quality combine to get rid of any guesswork and create a cost-efficient product that can accommodate various subsurface issues. A pile may be made of steel, timber, or precast concrete.

An Increase in Bearing Capacity

When it comes to using piles, make sure that the company with which you work knows all about driving various types of piles. When you have piles designed and made, they can be configured before installation. Many piles are driven into granular soils, which causes an increase in bearing capacity.

Clean and Neat Results

When the piles are driven correctly, the results are clean and neat and worksite supervision is reduced as well. When piles are driven, they can be used in spots where drilling a hole is not advised. In these cases, engineers fear that drilling a hole may reach groundwater that is pressurised.

Therefore, driven piles are often used in areas where a structure is built over water. These structures may include jetties or wharves. When a pile is driven, it maintains its shape during installation. In turn, this type of pile will not bulge outward in softer ground and typically will not get damaged if other piles are driven into the ground.

An Easier Installation

Engineers often recommend the use of driven piles as they do not require curing and can be driven sequentially rather than having to skip and add alternate piles. By taking this approach, equipment does not need to be moved as much and the installation is faster.

When you add driven piles, you can be assured that that the installation and equipment have already been proven to work. Because of the innovative advances in equipment and materials, driven piles can be installed with the utmost in efficiency. Whilst alternate piling methods have their place, driven piles require fewer movements of traffic.

What You Will Need to Find Out

If you need to have piles driven for a structure you are planning, talk to a company that can answer all your enquiries. You will need to find out the type of material that should be used as well as the time for installation. You will also need to learn more about the length and width of the pile and the type of equipment that will be employed for the project.